DIMENSIONS "h", "s", "t" and "e"

"H"- height • Increase by moving parison mold and/or blow mold out-ward (add shim). • Reduce by moving parison mold and/or blow mold inward (remove shim). "S"- neck finish • Increase by moving parison mold and/or blow mold out-ward (add shim). • Reduce by moving parison mold and/or blow mold inward (remove shim). "T"- average of "h" and "s" • Reduce parison mold's neck temperature • Verify temperature control unit operation. To raise "t" • Increase the injection time • Increase the hold time. • Reduce the blow mold and/or parison mold neck temperature. • Increase the internal core rod cooling. To lower "t" • Increase the parison mold and/or blow mold neck temperature. • Reduce core rod cooling. • Plumb hot water to blow mold neck. "E" (taken across major and minor axes) • Reference to "T dimension