Injection Injection Molding
Oversized Part.
Recommended Actions
Part is too large when compared to the drawing specifications.
Possible Solutions
Decrease booster time.
Decrease cylinder temperature.
Decrease holding pressure.
Decrease injection pressure.
Decrease injection speed.
Decrease overall cycle time.
Increase gate size and/or change gate location.
Increase mold temperature.
- Part is too large when compared to the drawing specifications.
- Possible Solutions
- Decrease booster time.
- Decrease cylinder temperature.
- Decrease holding pressure.
- Decrease injection pressure.
- Decrease injection speed.
- Decrease overall cycle time.
- Increase gate size and/or change gate location.
- Increase mold temperature.
Related Knowledge
Source
Imported from Molding Defects All Platforms spreadsheet